EPM9560ABC356-10
| Parameters | |
|---|---|
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 144.9MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 356 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 174mA |
| Number of I/O | 216 |
| Nominal Supply Current | 174mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 144MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 12000 |
| Number of Programmable I/O | 216 |
| Number of Logic Blocks (LABs) | 35 |
| Output Function | MACROCELL |
| Number of Macro Cells | 560 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.63mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 356 |
| Published | 1994 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 356 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
EPM9560ABC356-10 Overview
Currently, there are 560 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is embedded in the BGA package.As you can see, this device has 216 I/O ports programmed into it.There are 356 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of BOTTOM.There is 5V voltage supply for this device.It is included in Programmable Logic Devices.It is programmed with 356 pins.A digital circuit is built using 12000gates.For high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.The 356pins are designed into the board.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.The minimal supply voltage is 4.75V.A programmable I/O count of 216 has been recorded.There is a maximum frequency of 144.9MHz.In order to operate properly, the operating temperature should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.It consists of 35 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.Programmable logic types can be divided into EE PLD.
EPM9560ABC356-10 Features
BGA package
216 I/Os
356 pin count
356 pins
35 logic blocks (LABs)
EPM9560ABC356-10 Applications
There are a lot of Altera EPM9560ABC356-10 CPLDs applications.
- Random logic replacement
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- ROM patching
- I2C BUS INTERFACE
- PLC analog input modules
- STANDARD SERIAL INTERFACE UART
- Storage Cards and Storage Racks
- Bootloaders for FPGAs
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Discrete logic functions
