EPM9560ARC208-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 208 |
| Published | 1994 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 144.9MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 174mA |
| Number of I/O | 153 |
| Nominal Supply Current | 174mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 144.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 12000 |
| Number of Programmable I/O | 153 |
| Number of Logic Blocks (LABs) | 35 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 560 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM9560ARC208-10 Overview
Currently, there are 560 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.QFPis the package in which it resides.There are 153 I/Os on the board.Devices are programmed with terminations of [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 5V is used as the power supply for this device.It belongs to the family [0].Chips are programmed with 208 pins.For digital circuits, there are 12000gates. These devices serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.Surface Mountis used to mount this electronic component.This board has 208 pins.In this case, the maximum supply voltage is 5.25V.The minimal supply voltage is 4.75V.There are 153 Programmable I/Os.In this case, 144.9MHzis the frequency that can be achieved.It is recommended that the operating temperature be greater than 0°C.Temperatures should not exceed 70°C.It is composed of 35 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.Types of programmable logic are divided into EE PLD.
EPM9560ARC208-10 Features
QFP package
153 I/Os
208 pin count
208 pins
35 logic blocks (LABs)
EPM9560ARC208-10 Applications
There are a lot of Altera EPM9560ARC208-10 CPLDs applications.
- USB Bus
- Portable digital devices
- STANDARD SERIAL INTERFACE UART
- ToR/Aggregation/Core Switch and Router
- Page register
- Reset swapping
- State machine design
- DDC INTERFACE
- Handheld digital devices
- PLC analog input modules
