EPM9560ARC208-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 208 |
| Published | 1994 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin/Copper (Sn/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 174mA |
| Number of I/O | 153 |
| Nominal Supply Current | 174mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 144MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 12000 |
| Number of Programmable I/O | 153 |
| Number of Logic Blocks (LABs) | 35 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 560 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
EPM9560ARC208-10N Overview
560macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is packaged with QFP.The device has 153inputs and outputs.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.An electrical supply voltage of 5V is used to power it.There are 208 pins on the chip.A digital circuit can be constructed using 12000gates.Optimal efficiency requires a supply voltage of [0].For data storage, EEPROMis adopted.The electronic part is mounted by Surface Mount.The pins are [0].It operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.There are a total of 153 Programmable I/Os.In order to operate properly, the operating temperature should be higher than 0°C.A temperature below 70°Cshould be used as the operating temperature.In its simplest form, it consists of 35 logic blocks (LABs).The maximum frequency should not exceed 144MHz.Types of programmable logic are divided into EE PLD.
EPM9560ARC208-10N Features
QFP package
153 I/Os
208 pin count
208 pins
35 logic blocks (LABs)
EPM9560ARC208-10N Applications
There are a lot of Altera EPM9560ARC208-10N CPLDs applications.
- INTERRUPT SYSTEM
- Voltage level translation
- Software Configuration of Add-In Boards
- Handheld digital devices
- Power Meter SMPS
- High speed graphics processing
- White goods (Washing, Cold, Aircon ,...)
- Software-driven hardware configuration
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Reset swapping
