EPM9560ARC240-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 240 |
| Published | 1994 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 144.9MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 240 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 174mA |
| Number of I/O | 191 |
| Nominal Supply Current | 174mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 144MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 12000 |
| Number of Programmable I/O | 191 |
| Number of Logic Blocks (LABs) | 35 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 560 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 32mm |
| Width | 32mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM9560ARC240-10 Overview
560 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.You can find it in package [0].The device has 191inputs and outputs.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 5V.The part is included in Programmable Logic Devices.A chip with 240pins is programmed.A digital circuit can be constructed using 12000gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, it is mounted by Surface Mount.The device has a pinout of [0].A maximum voltage of 5.25Vis required for operation.The minimal supply voltage is 4.75V.A total of 191 Programmable I/Os are available.In this case, 144.9MHzis the frequency that can be achieved.In order to operate properly, the operating temperature should be higher than 0°C.A temperature below 70°Cshould be used as the operating temperature.35logic blocks (LABs) make up this circuit.It is recommended that the maximal frequency be less than 0.There is a type of programmable logic called EE PLD.
EPM9560ARC240-10 Features
QFP package
191 I/Os
240 pin count
240 pins
35 logic blocks (LABs)
EPM9560ARC240-10 Applications
There are a lot of Altera EPM9560ARC240-10 CPLDs applications.
- Pattern recognition
- Synchronous or asynchronous mode
- TIMERS/COUNTERS
- Handheld digital devices
- Timing control
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Address decoding
- ROM patching
- Discrete logic functions
- Multiple DIP Switch Replacement
