EPM9560ARI240-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 240 |
| Published | 1994 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 144.9MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 240 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 174mA |
| Number of I/O | 191 |
| Nominal Supply Current | 174mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 144.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 12000 |
| Number of Programmable I/O | 191 |
| Number of Logic Blocks (LABs) | 35 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 560 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 32mm |
| Width | 32mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM9560ARI240-10 Overview
560macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.In the QFPpackage, you will find it.There are 191 I/Os on the board.There is a 240terminations set on devices.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 5V voltage supply for this device.It is included in Programmable Logic Devices.In this chip, the 240pins are programmed.The 12000gates serve as building blocks for digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].In general, it is recommended to store data in [0].A Surface Mountis mounted on this electronic component.There are 240pins on it.With a maximum supply voltage of [0], it operates.It is powered by 4.5Vas its minimum supply voltage.Programmable I/Os are counted up 191.This frequency can be achieved at 144.9MHz.It is recommended that the operating temperature be higher than -40°C.It is recommended that the operating temperature be lower than 85°C.There are 35 logic blocks (LABs) in its basic building block.The maximum frequency should not exceed 144.9MHz.Types of programmable logic are divided into EE PLD.
EPM9560ARI240-10 Features
QFP package
191 I/Os
240 pin count
240 pins
35 logic blocks (LABs)
EPM9560ARI240-10 Applications
There are a lot of Altera EPM9560ARI240-10 CPLDs applications.
- DMA control
- Discrete logic functions
- Storage Cards and Storage Racks
- Synchronous or asynchronous mode
- Timing control
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Bootloaders for FPGAs
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- POWER-SAVING MODES
- I/O expansion
