EPM9560RC240-15
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 240 |
| Published | 1994 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | 772 FLIP FLOPS; CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 117.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 146mA |
| Number of I/O | 191 |
| Nominal Supply Current | 146mA |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Frequency (Max) | 144MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 12000 |
| Number of Programmable I/O | 191 |
| Number of Logic Blocks (LABs) | 35 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 560 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 32mm |
| Width | 32mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM9560RC240-15 Overview
There are 560 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a QFP package containing it.There are 191 I/Os on the board.240terminations have been programmed into the device.Its terminal position is QUAD.Power is provided by a supply voltage of 5V volts.It is included in Programmable Logic Devices.There are 240pins on the chip.This device is also capable of displaying [0].12000gates are devices that serve as building blocks for digital circuits.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.EEPROM is adopted for storing data.Surface Mountmounts this electronic component.A total of 240pins are provided on this board.A maximum supply voltage of 5.25Vis used in its operation.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.There are 191 Programmable I/Os.There is 117.6MHz frequency that can be achieved.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.There are 35 logic blocks (LABs) in its basic building block.A maximum frequency of less than 144MHzis recommended.Programmable logic types are divided into EE PLD.
EPM9560RC240-15 Features
QFP package
191 I/Os
240 pin count
240 pins
35 logic blocks (LABs)
EPM9560RC240-15 Applications
There are a lot of Altera EPM9560RC240-15 CPLDs applications.
- Digital systems
- Software-driven hardware configuration
- Software Configuration of Add-In Boards
- ON-CHIP OSCILLATOR CIRCUIT
- Interface bridging
- Software-Driven Hardware Configuration
- Handheld digital devices
- LED Lighting systems
- Protection relays
- Custom state machines
