ESRE151M06B-F
| Parameters | |
|---|---|
| Ripple Current @ High Frequency | 3.3A @ 100kHz |
| Height Seated (Max) | 0.161 4.10mm |
| Length | 7.2898mm |
| Width | 4.2926mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 2917 (7343 Metric) |
| Surface Mount Land Size | 0.287Lx0.169W 7.30mmx4.30mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2013 |
| Series | ESRE |
| Size / Dimension | 0.287Lx0.169W 7.30mmx4.30mm |
| Tolerance | ±20% |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Polymer |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Applications | Bypass, Decoupling |
| Voltage - Rated | 6.3V |
| Capacitance | 150μF |
| ESR (Equivalent Series Resistance) | 12mOhm |
| Lifetime @ Temp | 1000 Hrs @ 105°C |
| Ripple Current | 3.3A |
| Life (Hours) | 1000 hours |
The capacitance can run at the range of 150μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of 2917 (7343 Metric). This capacitor is accessible in the Bulk packaging. It belongs to ESRE series. This part is mounted in the way of Surface Mount. The type of the ESRE151M06B-F capacitor can be classified as Polymer. It is suitable for the component connected in Bypass, Decoupling. This device operates temperature at the range of -55°C~105°C. Cornell Dubilier Electronics (CDE) ESRE151M06B-F is suitable to conduct the ripple current at 3.3A. ESRE151M06B-F Capacitor is mounted by Surface Mount. ESRE151M06B-F Capacitor. Voltage - Rated often has values of 6.3V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
ESRE Series
Capacitance: 150μF
Tolerance: ±20%
Package / Case: 2917 (7343 Metric)
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of ESRE151M06B-F Aluminum Polymer Capacitors.
Typically, ESRE151M06B-F is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Smoothing Noise Filtering
- Power Line Buffering
- To reduce power noise & signal noise
- Power Factor Correction
- Computer motherboards
- Coupling or blocking
- DC/DC, DC/AC, and AC/AC converters
- Server motherboards
- DC Buffering
- Voltage Doubling
