FA80386EXTC33
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Number of Terminations | 144 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 118°C |
| Operating Temperature (Min) | -40°C |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 320mA |
| Bit Size | 32 |
| Access Time | 33 μs |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of Serial I/Os | 3 |
| Number of External Interrupts | 12 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 1.7mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
FA80386EXTC33 Overview
The embedded microprocessor has been packed in TQFP for convenient overseas shipping. High reliability is achieved with advanced packaging method Bulk. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR. The total number of terminations is 144. A 5V voltage supply should be used to turn on and run the cpu microprocessor. There is a 32-Bit architecture in it. CPUs operate at 33MHz Hz. For information about 144 pins, please refer to the datasheet. An example of a Microprocessors microprocessor can be found here. An external data bus width of 16 is available on this CPU. The CPU microprocessor body is injected with 144 pins. Many applications use this CPU with Surface Mount mounted. There is a 5V function for the micro processor. According to the datasheet, the embedded microprocessor requires 5V power supply. It is 5V on the CPU's core. There is a maximum voltage you can supply to the CPU of 320mA. A voltage greater than 5.5V should not normally be applied to the embedded microprocessor. There should be 4.5V voltage applied to the CPU microprocessor below 4.5V. Over -40°C should be set as the operating environment. 12 hardware interrupts are terminated externally. Data is received between peripherals by 3 serial I/Os. DMA (Direct Memory Access) is programmed with 2 channels.
FA80386EXTC33 Features
32-Bit Structure
FA80386EXTC33 Applications
There are a lot of Intel FA80386EXTC33 Microprocessor applications.
- Projectors
- Embedded gateways
- Switches
- Copiers
- Agriculture, transportation field
- Medical instruments chromatographs
- Communication-bluetooth, Wi-Fi, radio
- Industrial robot
- Xbox
- Oscilloscopes
