FAH4840L8X
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Applications | Haptic Feedback |
| Technology | Power MOSFET |
| Voltage - Supply | 2.5V~4.3V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FAH4840 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 2V |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 4.3V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 77mA |
| Output Configuration | Differential |
| Current - Output | 200mA |
| Logic Function | AND |
| Voltage - Load | 1.95V |
| Motor Type - AC, DC | LRA |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
FAH4840L8X Overview
The design contains a Cut Tape (CT)package.Parts are packaged in 8-UFQFNcases.In general, it is recommended that the part be mounted by Surface Mount.I believe it is suitable for the component connected to Haptic Feedback.Drivers controllers is capable of supplying 2.5V~4.3V volts.This device operates at a temperature range of -40°C~150°C TJ.There is a motor type LRAavailable.In this part, there are 8 terminations available.The voltage can applied to the load at the rate of 1.95V.Drivers controllers is important to note that this amplifier should be operated at the 3.3Vsetting.Surface Mountis its recommended mounting method.Keep the part output current at 200mA.This device utilizes the BRUSH DC MOTOR CONTROLLERanalog integrated circuit.The FAH4840part number is used to locate the part.The device has 8 pins.Currently, there are 1 outputs available.This driver operates from a supply voltage of 3.3V.2Vis maintained as the output voltage.Controller ic operates wController ich a supply current of 77mA.
FAH4840L8X Features
Applications : Haptic Feedback
Load voltage across the chip 1.95V
base on FAH4840 number
designed with 1 outputs
FAH4840L8X Applications
There are a lot of ON Semiconductor FAH4840L8X motor drivers applications.
- Street lights
- drivers for outdoor application
- Architectural lighting
- Large format LED backlighting
- Commercial office
- Horticultural lighting
- Mobile phone display backlight and key light driving
- A cross between entertainment
- Hospitality buildings
- Outdoor area lights
