FAN2002MPX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 156mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Additional Feature | ALSO OPERATES IN PFM MODE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Pitch | 0.95mm |
| Base Part Number | FAN2002 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 5.5V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.3MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN2002MPX Overview
This harley voltage regulator utilizes the Tape & Reel (TR) package for optimized performance. In this voltage regulator, there are a total of 6 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this voltage regulator is packaged in the 6-WDFN Exposed Pad package. 1 outputs have been configured in the voltage regulator 12v. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. This switching regulator is designed to fit the Surface Mount mounting system. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. In this voltage regulator 12v, the switching frequency is 1.3MHz. Voltage regulators like this one can operate at least with 2.5V as the dc to dc voltage regulator's minimum input voltage. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 0.8V. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. DC/DC regulators of this type are part of the FAN2002 family of voltage regulator 12vs. At 5.5V volts, voltage regulator can provide voltage. In order to operate voltage regulator, there are 6 pins that must be connected. The output voltage of this voltage regulator 12v should at least be set at 800mV volts at all times. For switching regulator maximum operation, dc to dc voltage regulator delivers 1A A. A maximum voltage of 5.5V can be obtained from the regulator voltage. An input voltage of 5.5V is used to operate this harley voltage regulator. Adding the ALSO OPERATES IN PFM MODE feature improves this switching regulator's efficiency and stability.
FAN2002MPX Features
1 outputs
6 pins
Operating supply voltage of 5.5V
ALSO OPERATES IN PFM MODE
FAN2002MPX Applications
There are a lot of ON Semiconductor FAN2002MPX Voltage Regulators applications.
- Surface processing equipment
- Current source circuits
- Digital precision reference circuits
- Communication system
- Experimental setup
- Correction machines
- Scientific testing
- USB circuits
- Remotely powered electric motors
- Direct power supply system
