Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE, NOT REC (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-WDFN Exposed Pad |
Number of Pins |
6 |
Weight |
156mg |
Operating Temperature |
0°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.95mm |
Frequency |
1.6MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
FAN2012 |
Function |
Step-Down |
Number of Outputs |
1 |
Efficiency |
95 % |
Output Voltage |
5.5V |
Output Type |
Adjustable |
Max Output Current |
1.5A |
Input Voltage-Nom |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Max Output Voltage |
5.5V |
Voltage - Output (Min/Fixed) |
0.8V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
1.3MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
800mV |
Height |
750μm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FAN2012MPX Overview
It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. Throughout this voltage regulator, there are 6 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. There is a 6-WDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. DC DC switching regulator is configured with 1 outputs. This DC DC switching regulator generates Adjustable output on its output pins. Surface Mount-mounting is compatible with this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at 0°C~85°C TA. A DC-DC switching regulator such as this one switches at 1.3MHz. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. An input voltage of 5V is required to meet the requirements of the switching regulator operation. DC/DC regulators of this type are part of the FAN2012 family of voltage regulator 12vs. Voltage of voltage regulator can be delivered at 5.5V volts. During switching regulator operation, 6 pins are used. Ideally this switch regulator should have an output voltage of about 800mV at the very least. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 1.5A A. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 5.5V, which is the highest available. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 4.5V V is required. A maximum supply voltage of 5.5V can be used to operate the voltage regulator 12v. A frequency of 1.6MHz allows dc to dc voltage regulator to maintain high accuracy.
FAN2012MPX Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
FAN2012MPX Applications
There are a lot of ON Semiconductor FAN2012MPX Voltage Regulators applications.
- Smart grid
- Current source circuits
- Program control systems
- Nuclear power plants
- Imported equipment
- Window air conditioners
- Planers
- Experimental setup
- Household control circuits
- Thermal power