FAN256L8X
| Parameters | |
|---|---|
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FAN256 |
| Output Type | Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 2 |
| Nominal Supply Current | 7mA |
| Power Dissipation | 226mW |
| Max Supply Current | 17μA |
| Propagation Delay | 400 ns |
| Quiescent Current | 17μA |
| Response Time | 6.2 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V ±0.8V~2.75V |
| Input Offset Voltage (Vos) | 15mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 68db CMRR, 80db PSRR |
| Propagation Delay (Max) | 400ns (Typ) |
| Height | 500μm |
| Length | 1.6mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Number of Pins | 8 |
| Weight | 25mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 226mW |
| Terminal Position | DUAL |
FAN256L8X Overview
In order to make transportation easier, it is packaged in 8-UFQFN .This comparator is of the Push-Pull, Rail-to-Rail output type.Ready for shipping in Tape & Reel (TR) package.You can find 8 terminals of the comparator.The electrical component here belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.Speaking of types, this is a typical General Purpose comparator.This element consists of 2 elements in total.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.In order to find a solution that meets your specific needs, search FAN256 for more pin-to-pin solutions.The comparator displays a quiescent current of 17μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 7mA in order to use the device normally.A current supply greater than 17μA may result in the comparator malfunctioning.You are allowed to input a maximum current of 10pA into the device.The operating supply voltage for normal operation should be 5.5V .
FAN256L8X Features
Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 17μA
FAN256L8X Applications
There are a lot of ON Semiconductor FAN256L8X linear comparators applications.
- Battery management and protection
- Power management
- Set Top Boxes
- RC Timers
- Wearable Devices
- Mobile Communications
- High-Speed Sampling Circuits
- General-Purpose, Low-Voltage Applications
- Wireless Base Stations
- Laptop Computers
