FAN302HLMY
| Parameters | |
|---|---|
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | mWSaver™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Max Power Dissipation | 660mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 85kHz |
| Base Part Number | FAN302 |
| Output Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Operating Supply Current | 3.5mA |
| Output Current | 1.5mA |
| Voltage - Supply (Vcc/Vdd) | 5V~25V |
| Max Supply Current | 4mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 140ns |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 15V |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 0.67 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Start Up | 16V |
| Height Seated (Max) | 1.75mm |
FAN302HLMY Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .In Tape & Reel (TR) case, the ac dc converter is available.There is a AC/DC converter mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~105°C TA in order to ensure its performance.Analog ICs of type BATTERY CHARGE CONTROLLER are used in this AC DC converter.This AC/DC converter is suitable for operation in the range of 5V~25V supply voltage (Vcc/Vdd).As a result, it has had 8 terminations.There are 8 pins on the ac/dc converter.It is suitable for mounting by Surface Mount .A member of the mWSaver? manufacturer family, it has the following characteristics.A similar acdc converter can be searched by using the FAN302 family.Current output is set to 1.5mA .Its output voltage is15V .AC to DC converter reaches high efficiency when operated at a frequency of 85kHz .Here is the standard for REACH SVHC : No SVHC .Supply currents up to 4mA can be handled by this power AC DC.
FAN302HLMY Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 1.5mA
FAN302HLMY Applications
There are a lot of ON Semiconductor FAN302HLMY AC DC Converters applications.
- WiFi Wireless
- Adapters
- PDAs
- Appliances
- Cleaners
- Adapters for Handheld Electronics
- Appliance Power Supplies
- Dimmers
- USB type-c v1.2 chargers with optional VDM
- Standby Power Supplies
