FAN3100CSX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 240mW |
| Technology | MOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | FAN3100 |
| Number of Outputs | 1 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 200μA |
| Output Current | 3A |
| Max Supply Current | 350μA |
| Propagation Delay | 20 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 13ns |
| Fall Time (Typ) | 9 ns |
| Rise / Fall Time (Typ) | 13ns 9ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Max Junction Temperature (Tj) | 150°C |
| High Side Driver | NO |
| Built-in Protections | TRANSIENT |
| Ambient Temperature Range High | 125°C |
| Height | 1.45mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN3100CSX Overview
The SC-74A, SOT-753 package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.Gate drivers is mounted in the way of Surface Mount.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -55°C~150°C TJ.The input type is Inverting, Non-Inverting.Its configuration is based on a total of 5 terminations.There are various parts that can be found under its base part number FAN3100.Mounting the device requires Surface Mount.When designing, the device is configured with 5 pins.The device is specifically designed to operate at 12V volts.Its interface IC is HALF BRIDGE BASED PERIPHERAL DRIVER.Mosfet driver is possible to achieve a maximum output current of 3A.Several electronic components are included in its subcategory of MOSFET Drivers.Based on its basis, it integrates 1 outputs.3A is the maximum output current supported by the device.According to its maximum power dissipation, 240mW is capable of conducting and transferring a large amount of power without overheating.As a precaution, make sure the supply current is kept at 350μA.During the operation of the system, the voltage of the operating supply should be set to 12V.
FAN3100CSX Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 240mW
FAN3100CSX Applications
There are a lot of ON Semiconductor FAN3100CSX gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- High power buffers
- Broadcast equipment
- Automotive Applications
- Motor Drives
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Supplies for controller area network (CAN),
- Line drivers
- Dual-Battery Systems
- Commercial and agricultural vehicles (CAV)
