FAN3111CSX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | FAN3111 |
| Number of Outputs | 1 |
| Max Output Current | 1.4A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 5μA |
| Output Current | 1.4A |
| Max Supply Current | 10μA |
| Propagation Delay | 15 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 9ns |
| Fall Time (Typ) | 8 ns |
| Rise / Fall Time (Typ) | 9ns 8ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.4A 1.4A |
| Max Junction Temperature (Tj) | 150°C |
| High Side Driver | NO |
| Ambient Temperature Range High | 125°C |
| Height | 1.45mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN3111CSX Overview
There is greater flexibility with the SC-74A, SOT-753 package.Tape & Reel (TR) represents the packaging method.In the direction of Surface Mount, gate drivers is mounted.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type in this program.5 terminations constitute its foundation.Numerous related parts are available for its base part number FAN3111.The device is mounted with Surface Mount.During design, it is configured with 5 pins.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED PERIPHERAL DRIVER.As a maximum, there is 1.4A limit to the output current.There are several useful electronic components in this subcategory of MOSFET Drivers.For its basis, there are 1 outputs integrated.Mosfet gate drivers can deliver a current of 1.4A.To increase stability, keep the supply current at 10μA.Setting the operating supply voltage to 12V is recommended.
FAN3111CSX Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
FAN3111CSX Applications
There are a lot of ON Semiconductor FAN3111CSX gate drivers applications.
- Solar inverters
- RGB applications
- Industrial Motor Inverter - Power Tools, Robotics
- Telecom switch mode power supplies
- Smart Phones
- Active Clamp Flyback or Forward and Synchronous Rectifier
- UPS systems
- Video amplifiers
- Commercial and agricultural vehicles (CAV)
- Multicolor LED/laser displays
