Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-WDFN Exposed Pad |
Number of Pins |
8 |
Weight |
129mg |
Operating Temperature |
-55°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
396mW |
Voltage - Supply |
4.5V~18V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
12V |
Terminal Pitch |
0.65mm |
Base Part Number |
FAN3121 |
Max Output Current |
11.4A |
Operating Supply Voltage |
12V |
Nominal Supply Current |
580μA |
Output Current |
9.7A |
Max Supply Current |
850μA |
Propagation Delay |
28 ns |
Input Type |
Inverting |
Turn On Delay Time |
28 ns |
Rise Time |
29ns |
Fall Time (Typ) |
27 ns |
Rise / Fall Time (Typ) |
23ns 19ns |
Interface IC Type |
BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
Channel Type |
Single |
Number of Drivers |
1 |
Driven Configuration |
Low-Side |
Gate Type |
N-Channel MOSFET |
Current - Peak Output (Source, Sink) |
10.6A 11.4A |
Built-in Protections |
UNDER VOLTAGE |
Height |
750μm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
FAN3121CMPX Overview
A higher level of flexibility is provided by its 8-WDFN Exposed Pad package.A packaging method of Tape & Reel (TR) is used.This device is equipped with 1 drivers for its configuration.Ideally, it should be mounted in the direction of Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This device is designed with a N-Channel MOSFET gate type.Mosfet driver is possible to use this device at temperatures as low as -55°C~150°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.The configuration starts with 8 terminations.Numerous related parts can be found under its base part number FAN3121.The device is mounted using Surface Mount.A total of 8 pins are available on the device.A supply voltage of 12V is required for operation.The interface chip of the system is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.An output current as high as 11.4A can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Mosfet driver supports an output current of 9.7A.This device has a maximum power dissipation of 396mW, indicating that it is capable of reducing power loss without overheating.For higher stability, the supply current should be kept at 850μA.Mosfet gate drivers is recommended that 12V be set as the operating supply voltage.
FAN3121CMPX Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 396mW
FAN3121CMPX Applications
There are a lot of ON Semiconductor FAN3121CMPX gate drivers applications.
- Line drivers
- Automotive Applications
- Motor Drives
- Video amplifiers
- Motor Controls
- Industrial Modules
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Multicolor LED/laser displays
- Isolated Supplies for controller area network (CAN),
- Telecom switch mode power supplies