FAN3180TSX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Base Part Number | FAN3180 |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 2.8A |
| Operating Supply Current | 12.5mA |
| Output Current | 2.5A |
| Max Supply Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 36 ns |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 18V |
| Rise Time | 19ns |
| Fall Time (Typ) | 13 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 19ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 2.8A |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FAN3180TSX Overview
In order to increase flexibility, the package SC-74A, SOT-753 is used.Tape & Reel (TR) represents the package.The configuration is supported by 1 drivers.Surface Mount is mounted in the way of the device.When the supply voltage is set to 5V~18V, it can demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.-40°C~125°C TJ is the allowed temperature range for this device.Mosfet driver accepts input of type Non-Inverting.As a result of its configuration, it contains a maximum of 5 terminations.There are various related parts under its base part number FAN3180.Devices are mounted by Surface Mount.A total of 5 pins are available on the device.Mosfet driver is designed specifically to run on 12V volts of power.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 2.8A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The output current supported by the device is 2.5A.Keeping the supply current at 200μA ensures greater stability.As a result, a voltage of 3.3V is produced.The power supply voltage for this device is set to 12.5mA.
FAN3180TSX Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
5 pins
FAN3180TSX Applications
There are a lot of ON Semiconductor FAN3180TSX gate drivers applications.
- A/D drivers
- High-voltage isolated DC-DC converters
- Video amplifiers
- DC-DC Converters
- serial peripheral interface (SPI), I2C
- Refrigerator
- Isolated switch mode power supplies (SMPS)
- High power buffers
- Motor Drives
- Multicolor LED/laser displays
