FAN3224CMPX
| Parameters | |
|---|---|
| Max Power Dissipation | 540mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | FAN3224 |
| Max Output Current | 5A |
| Operating Supply Current | 950μA |
| Output Current | 5A |
| Max Supply Current | 950μA |
| Propagation Delay | 29 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 29 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 12ns 9ns |
| Interface IC Type | FULL BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| Built-in Protections | UNDER VOLTAGE |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 129mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
FAN3224CMPX Overview
Its 8-WDFN Exposed Pad package is adopted for higher flexibility.The packaging method is indicated by Tape & Reel (TR).There are 2 drivers installed for this device.Gate drivers is mounted in the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~18V.A gate type of N-Channel MOSFET has been used in its design.Temperature range -40°C~125°C TA is allowed for this device.Non-Inverting is used as the input type in this program.8 terminations constitute its foundation.Numerous related parts can be found under its base part number FAN3224.The mount method is Surface Mount.There are 8 pins available in the device.With a supply voltage of 12V, it is designed to operate.FULL BRIDGE BASED PERIPHERAL DRIVER is employed as its interface IC.In the maximum case, the output current can be limited to 5A.Its subcategory of MOSFET Drivers contains various useful electronic components.An output current of 5A is supported.Its maximum power dissipation of 540mW shows its power loss capacity without overheating.For higher stability, the supply current should be kept at 950μA.With a voltage of 950μA, it operates with a constant current.
FAN3224CMPX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 540mW
FAN3224CMPX Applications
There are a lot of ON Semiconductor FAN3224CMPX gate drivers applications.
- Motor Controls
- AC-DC Inverters
- Power factor correction (PFC) circuits
- Solar inverters
- 3-Phase Motor Inverter Driver
- Digitally controlled power supplies
- DC/DC converters
- Head-up and Head mounted displays
- Isolated switch mode power supplies (SMPS)
- High power buffers
