FAN3225CMX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 540mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | FAN3225 |
| Max Output Current | 5A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 210μA |
| Output Current | 5A |
| Max Supply Current | 350μA |
| Propagation Delay | 29 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 29 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 12ns 9ns |
| Interface IC Type | FULL BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN3225CMX Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.2 drivers are incorporated for its configuration.There is a mounting bracket in the way of Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.The gate type on this device is N-Channel MOSFET.Temperature range -40°C~125°C TA is allowed for this device.This program uses the input type of Inverting, Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.There are various related parts under its base part number FAN3225.You mount it with Surface Mount.At the time of design, it is configured with 8 pins.This device operates with 12V supply voltage.There is an interface IC called FULL BRIDGE BASED PERIPHERAL DRIVER that is employed in this device.5A is the maximum output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.An output current of 5A is supported.According to its maximum power dissipation, 540mW is capable of conducting and transferring a large amount of power without overheating.Mosfet gate drivers is recommended to keep the supply current at 350μA to ensure greater stabilMosfet gate driversy.Setting the operating supply voltage to 12V is recommended.
FAN3225CMX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 540mW
FAN3225CMX Applications
There are a lot of ON Semiconductor FAN3225CMX gate drivers applications.
- Motor Control
- Isolated switch mode power supplies (SMPS)
- PCMCIA applications
- Solar power supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High-voltage isolated DC-DC converters
- Isolated Supplies for Motor Control
- Line drivers
- Power factor correction (PFC) circuits
- High frequency line drivers
