FAN3229TMX-F085
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 460mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | FAN3229 |
| Max Output Current | 3A |
| Nominal Supply Current | 750μA |
| Output Current | 3A |
| Max Supply Current | 1.2mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 12ns |
| Fall Time (Typ) | 9 ns |
| Rise / Fall Time (Typ) | 12ns 9ns |
| Interface IC Type | FULL BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.034 µs |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FAN3229TMX-F085 Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.For its configuration, it incorporates 2 drivers.Its recommended mounting way is Surface Mount.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.For this device, the temperature range is -40°C~125°C TJ.The input type for this program is Inverting, Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts can be found under its base part number FAN3229.Mosfet driver is mounted using the Surface Mount method.There are 8 pins available in the device.A supply voltage of 12V is required for operation.In this case, FULL BRIDGE BASED PERIPHERAL DRIVER serves as the interface IC.An output current as high as 3A can be achieved at maximum power.This subcategory of MOSFET Drivers has a number of useful electronic components.Mosfet driver supports an output current of 3A.This device has a maximum power dissipation of 460mW, indicating that it is capable of reducing power loss without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 1.2mA.Among the Automotive, AEC-Q100 series, this gate driver is included.
FAN3229TMX-F085 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 460mW
Operating with the supply voltage of Automotive, AEC-Q100
FAN3229TMX-F085 Applications
There are a lot of ON Semiconductor FAN3229TMX-F085 gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Solar inverters
- Portable Navigation Devices
- Smart Phones
- Solar power supplies
- Isolated switch mode power supplies (SMPS)
- Line drivers
- Motor controllers
- Active filtering
- Broadcast equipment
