FAN3241TMX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Material | Brass, Plastic |
| Weight | 230.4mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Crimp |
| ECCN Code | EAR99 |
| Resistance | 1Ohm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Color | Black |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 40V |
| Base Part Number | FAN3241 |
| Number of Outputs | 2 |
| Output Voltage | 60V |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Power Supplies | 40V |
| Voltage | 60V |
| Interface | On/Off |
| Plating | Tin |
| Nominal Supply Current | 400μA |
| Current | 5mA |
| Output Configuration | Low Side |
| Wire Gauge (Max) | 24 AWG |
| Wire Gauge (Min) | 20 AWG |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 600μA |
| Input Type | Non-Inverting |
| Max Output Voltage | 60V |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~60V |
| Driver Number of Bits | 2 |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 1 Ω |
| Diameter | 19.9898mm |
| Height | 15.0114mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN3241TMX Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is Latched Driver.Ensure reliable operation by setting the temperature to -40°C~105°C TA.The lighting driver is equipped with 2 outputs that can be used.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.As you can see, it comes from the FAN3241 family.It contains 8 terminations.In order to operate, the 8 pins are used.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 40V.The lighting driver is mounted in the way of Surface Mount.1Ohm is the resistance of the lighting driver.The output current is set to 5mA in this case.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.This part has a power supply of 40V.It requires a maximum current requirement of 600μA.
FAN3241TMX Features
Supplied from 40V
Resistance of 1Ohm
FAN3241TMX Applications
There are a lot of ON Semiconductor FAN3241TMX Power Switches ICs applications.
- Smartphone and PDA
- Storage Drives
- Hot Swap
- Portable GPS Device
- HDD and SSD
- PC Card Hot Swap
- Solid State Drivers
- Portable Devices
- Hard Disk Drives
- HDD, SSD
