FAN4174IS5X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | FAN4174 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5.25V |
| Number of Channels | 1 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 300μA |
| Slew Rate | 3V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.3V~5.25V |
| Output Current per Channel | 33mA |
| Input Offset Voltage (Vos) | 8mV |
| Bandwidth | 3.7MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 102dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN4174IS5X Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. A Voltage Feedback-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 5 pins on this chip. Op amp ic rates 8mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. Operational amplifier can operate supply current at 200μA. Maintain 102dB as the voltage gain. The op amp ic has 1 channels on it. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 5.25V. For the packing of the instrumentation amplifier, TR is adopted.
FAN4174IS5X Features
supply voltage of 2.7V
102dB voltage gain
Output Type: Rail-to-Rail
FAN4174IS5X Applications
There are a lot of ON Semiconductor FAN4174IS5X Instrumentational OP Amps applications.
- Automation control systems
- Automatic control
- Displayers for aircraft and air transportation control systems
- Non-polarized electrodes
- Tablets
- Semiconductor detectors
- ECG equipment
- PDA
- Proportional counter tubes
- Laptop
