banner_page

FAN48630UC33X

16 Terminals 16-Pin FAN48630 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 2.5MHz Tape & Reel (TR) 1.5A Switch 16-UFBGA, WLCSP


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FAN48630UC33X
  • Package: 16-UFBGA, WLCSP
  • Datasheet: -
  • Stock: 542
  • Description: 16 Terminals 16-Pin FAN48630 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 2.5MHz Tape & Reel (TR) 1.5A Switch 16-UFBGA, WLCSP (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-UFBGA, WLCSP
Number of Pins 16
Weight 58.66667mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2013
Series TinyBoost®
JESD-609 Code e1
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Additional Feature ALSO HAS 3.49V OUTPUT
Subcategory Switching Regulator or Controllers
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Terminal Pitch 0.4mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number FAN48630
Function Step-Up
Number of Outputs 1
Qualification Status Not Qualified
Efficiency 96 %
Voltage - Input (Max) 5.5V
Output Voltage 3.49V
Output Type Programmable
Max Output Current 1.5A
Input Voltage-Nom 3V
Min Supply Voltage 2.35V
Analog IC - Other Type SWITCHING REGULATOR
Operating Supply Current 150μA
Output Configuration Positive
Current - Output 1.5A Switch
Max Output Voltage 5V
Voltage - Output (Min/Fixed) 3.3V 3.49V
Topology Boost
Control Mode CURRENT-MODE
Frequency - Switching 2.5MHz
Synchronous Rectifier Yes
Min Output Voltage 3.49V
Height 378μm
Length 1.78mm
Width 1.78mm
RoHS Status ROHS3 Compliant

FAN48630UC33X Overview


It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. As you can see, this harley voltage regulator contains 16 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. There is a 16-UFBGA, WLCSP package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs configured on this voltage regulator 12v. This DC DC switching regulator generates Programmable output on its output pins. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. This voltage regulator 12v reaches a switching frequency of 2.5MHz. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 3.3V 3.49V. Featuring a 1.5A Switch output current, dc to dc voltage regulator offers maximum design flexibility. Voltage regulator's input voltage can reach 5.5V. A regulator with this NOT SPECIFIED peak reflow temperature is essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 3V. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. As a member of the FAN48630 family of DC/DC regulators, this is a DC/DC regulator. At 3.49V volts, voltage regulator can provide voltage. In order to operate voltage regulator, there are 16 pins that must be connected. This voltage regulator 12v should be configured with an output voltage that is at least 3.49V. A maximum output current of 1.5A A is available to meet the switching regulator operation requirements. With a maximum output voltage of 5V, DC DC switching regulator has a very high efficiency. As the name implies, this voltage regulator belongs to the TinyBoost? family of voltage regulators, and it is a type of switching DC-DC regulator. The dc to dc voltage regulator's minimum supply voltage of 2.35V volts ensures reliable performance. Switching regulators with the ALSO HAS 3.49V OUTPUT feature are more efficient and stable than those without. A 150μA supply current is required to power this voltage regulator.

FAN48630UC33X Features


1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
16 pins
ALSO HAS 3.49V OUTPUT

FAN48630UC33X Applications


There are a lot of ON Semiconductor FAN48630UC33X Voltage Regulators applications.

  • Access control systems
  • Alternators
  • Arc suppression circuits
  • Imported equipment
  • Refrigerators of central air conditioners
  • Analog precision reference circuits
  • Domestic water pumps
  • Energy management systems
  • Game consoles
  • Computer-related products

Write a review

Note: HTML is not translated!
    Bad           Good