FAN4931IP5X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 23g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | FAN4931 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5.25V |
| Number of Channels | 1 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Output Current | 33mA |
| Slew Rate | 3V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.3V~5.25V |
| Output Current per Channel | 33mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 3.7MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 102dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN4931IP5X Overview
Packaged in a 5-TSSOP, SC-70-5, SOT-353 case, the buffer op amp is ready to use. Op amps are Voltage Feedback types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be 5 terminations in the next few months. Please take in mind that this instrumentation amplifier should be run at 2.7V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 5 pins are included on the operational amplifiers. The input offset voltage is 6mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. You can run this op amp ic on 200μA . It is recommended to keep the voltage gain at 102dB at all times. Instrumentation amplifier has 1 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 5.25V voltage. This linear amplifier pack is based on the TAPE AND REEL axis.
FAN4931IP5X Features
supply voltage of 2.7V
102dB voltage gain
Output Type: Rail-to-Rail
FAN4931IP5X Applications
There are a lot of ON Semiconductor FAN4931IP5X Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Broadcasting
- Hand-held batteries
- Image computer boards
- Computer workstations
- Communication device
- Automotive sensors
- Signal operation
- Band-pass filter
- Power transmission
