FAN5341UMPX
| Parameters | |
|---|---|
| Supply Voltage | 3.6V |
| Current Rating | 25mA |
| Frequency | 1.2MHz |
| Base Part Number | FAN5341 |
| Number of Outputs | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 25mA |
| Max Supply Current | 750nA |
| Max Output Voltage | 17.5V |
| Voltage - Output | 6.2V~17.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 25mA |
| Min Output Voltage | 6.2V |
| Max Output Power | 500mW |
| Internal Switch(s) | Yes |
| Dimming | Single-Wire |
| Number of Segments | 5 |
| Multiplexed Display Capability | NO |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 40mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
FAN5341UMPX Overview
The 6-UDFN Exposed Pad package conserves board space. Using this LED driver, there are 1 outputs.This mounting method is Surface Mount.It emerges as a DC DC Regulator, which is efficient and reliable.When the temperature is -40°C~85°C TA, it can work normally.The benefits it provides to Backlight are considerable.A frequency of 1.2MHz is used to operate it.In this case, there are 6 terminations.There are 6 pins used to form the base of its configuration.A total of 5 segments are estimated.This is mounted by Surface Mount.Under the base part number FAN5341, you will find this LED driver.A maximum supply voltage of 5.5V is acceptable.It has a voltage output of 6.2V~17.5V.Further, it can be classified as Display Drivers based on its characteristics.This device operates with a minimum input voltage of 2.7V volts.It achieves maximum efficiency with a minimal voltage supply of 2.7V.Supply current cannot exceed 5.5V.If the maximum current supply is less than 750nA, this device provides high efficiency.25mA is the maximum current the load can handle.It is recommended that the output voltage be no higher than 17.5V.This device maintains a minimal voltage of 6.2V.
FAN5341UMPX Features
Available in the 6-UDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
FAN5341UMPX Applications
There are a lot of ON Semiconductor FAN5341UMPX LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- LED backlight driver for LCD displays for portable equipment
- Scanners and Handy Terminals
- Architectural lighting
- General lighting
- LED Lightings for Inspection Devices
- Street lighting
- Down lights
- Amusement Machines
- LED backlight driver for LCD displays for Tablets and Note PCs
