FAN53600AUC33X
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 19 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 45mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FAN53600 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 92 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Voltage - Input (Min) | 2.3V |
| Input Voltage-Nom | 3.6V |
| Min Supply Voltage | 2.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3mA |
| Output Configuration | Positive |
| Max Output Voltage | 3.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 3MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 3.3V |
| Height | 378μm |
| Length | 860μm |
| Width | 1.16mm |
FAN53600AUC33X Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. In this voltage regulator, 6 terminations are present. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. Space savings are achieved by placing this voltage regulator in the 6-UFBGA, WLCSP package. There are 1 outputs configured on the voltage regulator. The adjusting voltage regulator generates Fixed output. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. A DC-DC switching regulator such as this one switches at 3MHz. Voltage regulators like this one can operate at least with 2.3V as the dc to dc voltage regulator's minimum input voltage. Voltage regulator's input voltage can reach 5.5V. NOT SPECIFIED is essentially indestructible due to DC DC switching regulator's peak reflow temperature. The voltage regulator 12v is designed to provide a nominal input voltage of 3.6V for operation. The regulator voltage is included in the Switching Regulator or Controllers subcategory of voltage regulators. In this case, the DC/DC regulator belongs to the family FAN53600. Voltage can be produced at 3.3V volts by voltage regulator. There are 6 pins that are used for the operation of the voltage regulator 12v. The output voltage of this voltage regulator 12v should at least be set at 3.3V volts at all times. Switching regulator has a maximum output current of 600mA A, which is sufficient to meet the requirements of operation. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 3.3V, which is the highest available. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 2.3V V.
FAN53600AUC33X Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
6 pins
FAN53600AUC33X Applications
There are a lot of ON Semiconductor FAN53600AUC33X Voltage Regulators applications.
- Series voltage regulation circuits
- Printing equipment
- Domestic water pumps
- Scientific testing
- Digital video recorders
- Mobile phones
- Imported equipment
- seismic instrument power circuits
- Motor controller circuits
- Network technology
