FAN5361UMP15X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 67mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PFM CONTROL TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FAN5361 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 92 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.5V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.3V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 1.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 6MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.5V |
| Height | 500μm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN5361UMP15X Overview
optimized performance is achieved by utilizing the Cut Tape (CT) package in this voltage regulator. There are 6 terminations in this voltage regulator. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. The space-saving 6-UDFN Exposed Pad package is available for this voltage regulator. 1 outputs have been configured in the voltage regulator 12v. On the output pins of this DC DC switching regulator, there is a Fixed output generated. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. A DC-DC switching regulator such as this one switches at 6MHz. Input voltage 2.3V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. There is a voltage regulator maximum input voltage of 5.5V. As a result of the NOT SPECIFIED peak reflow temperature, this regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. This voltage regulator is included in the Switching Regulator or Controllers subcategory. In the particular voltage regulators, the FAN5361 family is represented. The adjusting voltage regulator's output voltage is maintain at 1.5V. To operate the voltage regulator 12v, 6 pins are required. There should be at least a 1.5V volt output voltage for this switching regulator in order to make it work properly. For switching regulator maximum operation, dc to dc voltage regulator delivers 600mA A. The maximum output voltage of this regulator voltage is 1.5V. DC-DC switching regulator with supply voltage 5.5V. Adding the PFM CONTROL TECHNIQUE ALSO POSSIBLE feature improves this switching regulator's efficiency and stability.
FAN5361UMP15X Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
6 pins
Operating supply voltage of 5.5V
PFM CONTROL TECHNIQUE ALSO POSSIBLE
FAN5361UMP15X Applications
There are a lot of ON Semiconductor FAN5361UMP15X Voltage Regulators applications.
- Electrical power transmission
- Overvoltage protection circuits in TV sets
- Domestic water pumps
- Window air conditioners
- Surface processing equipment
- Hydrogen power
- Digital display device
- Radio equipment
- Photovoltaic power
- Digital video recorders
