FAN5400UCX
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FAN5400 |
| Qualification Status | Not Qualified |
| Output Voltage | 1.8V |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 6V |
| Power Supplies | 5V |
| Interface | I2C, USB |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Max Output Voltage | 4.4V |
| Max Input Voltage | 20V |
| Supply Current-Max (Isup) | 0.09mA |
| Min Output Voltage | 3.5V |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.5V Max |
| Height | 378μm |
| Length | 1.96mm |
| Width | 1.87mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, WLCSP |
| Number of Pins | 20 |
| Weight | 73mg |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
FAN5400UCX Overview
It is included in the Tape & Reel (TR) package for convenience.The package that is included with it comes in the shape of a 20-UFBGA, WLCSP.The device's mounting type is Surface Mount.Setting the temperature to -30°C~85°C TA is the right thing to do.In order for this device to function, it utilizes an analog integrated circuit called ANALOG CIRCUIT.If the device needs to be charged, it must be supplied with Constant - Programmable current.There are related parts to this device according to the base part number FAN5400.There are 20 terminations in it.Hence, the battery pack is at 4.5V Max when it comes to voltage.The unit is equipped with a number of programmable features, including Current, Timer, Voltage.In order for the product to be functional, it requires that you connect the 20 pins according to the instructions.Using a 5V battery should be enough to run it.A supply voltage of no more than 6V is required for the device to operate properly.In the case of 1.8V output voltage, there is a possibility of optimal efficiency.This device belongs to the subcategory of Power Management Circuits.It is capable of functioning at a voltage as low as possible, for example 4V voltage for this circuit is used.Amounting is in line with Surface Mount.It is set to 0.09mA for Vsup (maximum supply voltage).When it comes to the part's power supply, it is set to 5V.It is recommended to set the supply voltage to 6V in order to maximize the efficiency of the system.Voltage input can be as low as 20V volts at its maximum.During this operation, the maximum output supply voltage should be 4.4V.It is important to note that during operation, the maximum output current is reduced to 1.25A.
FAN5400UCX Features
Battery pack voltage of 4.5V Max
Power Management Circuits subcategory
20-UFBGA, WLCSP package
FAN5400UCX Applications
There are a lot of ON Semiconductor FAN5400UCX Battery Chargers ICs applications.
- Electric vehicles
- Personnel carriers
- Embedded automotive applications
- Modern LA
- Home appliances
- Home routers
- Automotive/electrical vehicle
- Pallet jacks
- Smart speakers
- Maintenance shops
