FAN54013UCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, WLCSP |
| Number of Pins | 20 |
| Weight | 73mg |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO HAS A CONTROL TECHNIQUE OF PFM |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FAN54013 |
| Qualification Status | Not Qualified |
| Output Voltage | 1.8V |
| Max Output Current | 1.45A |
| Operating Supply Voltage | 6V |
| Power Supplies | 5V |
| Interface | I2C, USB |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Max Output Voltage | 1.9V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.3mA |
| Min Output Voltage | 1.7V |
| Switcher Configuration | BUCK |
| Switching Frequency-Max | 3300kHz |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.5V Max |
| Height | 378μm |
| Length | 1.87mm |
| Width | 1.96mm |
| RoHS Status | RoHS Compliant |
FAN54013UCX Overview
It is contained in the package Tape & Reel (TR).In order to make it more convenient, it has been included in the 20-UFBGA, WLCSP package.Surface Mount is the mounting type of the device.A temperature setting of -30°C~85°C TA would be the best thing to do.In order for the device to function, an analog IC named SWITCHING REGULATOR must be used.The device needs to be charged at a current of Constant - Programmable in order to function.Based on the base part number FAN54013, its related parts can be identified.Among its terminations, there are 20.4.5V Max is the voltage for the battery pack.Among the programmable features are Current, Timer, Voltage.There are 20 pins necessary to make it work.Batteries with 5V can be used to power it.Applied input voltage of 6V does not damage the device.In the case of 1.8V, the output voltage is likely to produce high efficiency.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.It can function at as low a supply voltage as possible, such as 4V.Amounting is in line with Surface Mount.0.3mA is set for Vsup (maximum supply voltage).5V is the power supply setting for the part.The supply voltage should be set to 6V for best efficiency.Voltage input can be as low as 20V volts at its maximum.It is also possible, with this device, to generate the additional features of ALSO HAS A CONTROL TECHNIQUE OF PFM.There is a maximum of 3300kHz switching frequency available for parts.In order for the operation to be carried out successfully, a maximum output supply voltage of 1.9V is required.The maximum output current is reduced to 1.45A in order to meet the operation conditions.
FAN54013UCX Features
Battery pack voltage of 4.5V Max
Power Management Circuits subcategory
Addtional features of ALSO HAS A CONTROL TECHNIQUE OF PFM
20-UFBGA, WLCSP package
FAN54013UCX Applications
There are a lot of ON Semiconductor FAN54013UCX Battery Chargers ICs applications.
- Locomotive
- Boat
- Maintenance shops
- Electric boat
- Instruments and meters
- Portable medical instruments
- Automotive/electrical vehicle
- Industrial handhelds
- Fast charge
- TV sticks
