FAN54046UCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 25-UFBGA, WLCSP |
| Number of Pins | 25 |
| Weight | 4.62mg |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 25 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Output Voltage | 4.5V |
| Max Output Current | 1.55A |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Interface | I2C |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 10mA |
| Output Current | 1.55A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.4V |
| Max Input Voltage | 28V |
| Supply Current-Max (Isup) | 0.28mA |
| Min Output Voltage | 3.5V |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 378μm |
| Length | 2.4mm |
| Width | 2mm |
| RoHS Status | RoHS Compliant |
FAN54046UCX Overview
The package Tape & Reel (TR) contains it, and you can find it there.It is contained in a package named 25-UFBGA, WLCSP.Mounting type is Surface Mount.The best way to adjust the temperature is to set it to -30°C~85°C TA.In order to operate this device, an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT must be used.To charge the device, there is a requirement for Constant - Programmable current.There are 25 terminations in it.This battery pack has a voltage of 4.2V.It is possible to program features such as Current, Timer, Voltage.It is necessary to connect the 25 pins during the installation process of this product.It is possible to access 2 channels.If it runs off of a 5V battery, then it should be able to run continuously.If the supply voltage exceeds 6V, the device will not function properly.High efficiency can be achieved with a 4.5V output voltage.Operation is done using a 1.55A output current.The device falls under the Power Management Circuits subcategory.It is capable of functioning at a voltage as low as possible, for example 4V voltage for this circuit is used.It is mounted in the way of Surface Mount.0.28mA is set for Vsup (maximum supply voltage).A power supply setting of 0 has been assigned to the part.It appears that there is 10mA current flowing through the supply of the gadget at the moment.There is a maximum input voltage of 28V volts that it can take.In order for the operation to be carried out successfully, a maximum output supply voltage of 4.4V is required.To meet operation conditions, the maximum output current is reduced to 1.55A.
FAN54046UCX Features
Battery pack voltage of 4.2V
2 channels
Power Management Circuits subcategory
25-UFBGA, WLCSP package
FAN54046UCX Applications
There are a lot of ON Semiconductor FAN54046UCX Battery Chargers ICs applications.
- Ruggedized notebooks/tablet computers
- Digital camera
- Maintenance shops
- Solar charging
- Painting boat
- Electric pallet truck
- Industrial lighting
- MP3, MP4 player
- Home appliances
- Man lift
