FAN5646UC00X
| Parameters | |
|---|---|
| Output Current per Channel | 20mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 42mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Series | TinyWire™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Current Rating | 20mA |
| Base Part Number | FAN5646 |
| Number of Outputs | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 22mA |
| Max Supply Current | 20mA |
| Max Output Voltage | 5V |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
FAN5646UC00X Overview
Save board space with 4-UFBGA, WLCSP package. For the design of these LED drivers, 1 outputs are used.We are using Surface Mount as the mounting method.In this case, the Linear emerges as highly efficient and reliable.If the led driver ic is set to -40°C~85°C TA, it will work normally.For its operation, terminations with a value of 0 are used.Its configuration is based on 4 pins.It's mounted on the way to Surface Mount.It's under the FAN5646 base part number.An acceptable maximum value for the supply voltage is 5.5V.It operates with the minimal input voltage of 2.7V.It works with the minimal supply voltage of 2.7V to meet highest efficiency standards.In the event that the maximum supply current is allowed, it reaches 5.5V.The device can deliver high efficiency when the maximal supply current is less than 20mA.You can supply 22mA current to the load.There are many applications for this LED driver belonging to the TinyWire? series.Voltages should not exceed 5V volts at the output.
FAN5646UC00X Features
Available in the 4-UFBGA, WLCSP package
Operating temperature of -40°C~85°C TA
FAN5646UC00X Applications
There are a lot of ON Semiconductor FAN5646UC00X LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- Down lighting
- High-end retail lighting
- Street lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED Lightings for Inspection Devices
- OLED power supply for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Replacement lamps
