FAN5701UC15X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFBGA, WLCSP |
| Number of Pins | 16 |
| Weight | 47mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Current Rating | 15mA |
| Frequency | 1.2MHz |
| Base Part Number | FAN5701 |
| Number of Outputs | 6 |
| Output Voltage | 4V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 180mA |
| Max Supply Current | 15mA |
| Max Output Voltage | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Output Current per Channel | 15mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 6 |
| Multiplexed Display Capability | NO |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FAN5701UC15X Overview
On the board, there is also a 16-UFBGA, WLCSP package that saves space.LED drivers are designed with 6 outputs.As far as mounting is concerned, Surface Mount is adopted.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are many benefits for Backlight.Based on the frequency of 1.2MHz, it operates.In this case, the terminations are set to 16.The base of this board is configured as 16 pins.6 segments exist.It's mounted by Surface Mount.LED drivers can be found under the base part number FAN5701.It is acceptable for the voltage to be 5.5V.Further, it can be classified as Display Drivers based on its characteristics.With a minimum input voltage of 2.7V volts, it can operate.A minimum supply voltage of 2.7V is required to meet the highest efficiency standards.It is possible to supply current up to 5V.This device is able to provide high efficiency when the maximal supply current should be less than 15mA.The load is capable of receiving 180mA current.There is 4V voltage output from it.It is not recommended to exceed 5V in the output voltage.
FAN5701UC15X Features
Available in the 16-UFBGA, WLCSP package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Output voltage of 4V
FAN5701UC15X Applications
There are a lot of ON Semiconductor FAN5701UC15X LED Driver ICs applications.
- Stage and Studio lighting
- General lighting
- A- lamps
- Refrigeration lighting
- LED Lightings for Inspection Devices
- LED Lighting PFCs, Linear Dimmable
- Industrial LED Lighting: Image Recognition Devices
- Constant Voltage Power Source for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Gallery lighting
