FAN5701UMP08X
| Parameters | |
|---|---|
| Dimming | PWM |
| Number of Segments | 6 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.55mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 177mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Current Rating | 8mA |
| Frequency | 1.2MHz |
| Base Part Number | FAN5701 |
| Number of Outputs | 6 |
| Output Voltage | 4V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 180mA |
| Max Output Voltage | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Output Current per Channel | 8mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 180mA |
FAN5701UMP08X Overview
The 16-UFQFN Exposed Pad package saves space on the board. In this LED driver, there are 6 outputs.Surface Mount is used for mounting.As a DC DC Regulator, it has high efficiency and reliability.The led light driver is capable of working normally at -40°C~85°C TA.Backlight has many advantages.In the 1.2MHz frequency range, it operates.A termination of 16 is used to operate the LED driver.A configuration of this chip is made up of 16 pins.The number of segments is estimated to be 6.As you can see, it is mounted by Surface Mount.LED drivers are found under the base part number FAN5701.As a maximum value, 5.5V is acceptable.In addition, a Display Drivers is assigned based on the characteristics of the object.This device requires a minimum voltage of 2.7V volts.As a result, it is designed to operate at a minimal voltage of 2.7V to ensure the most efficiency possible.In the event that the maximum supply current is allowed, it reaches 5V.A load can be supplied with 180mA current.4V is the voltage at the output terminal.The output voltage should not be in excess of 5V.
FAN5701UMP08X Features
Available in the 16-UFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Output voltage of 4V
FAN5701UMP08X Applications
There are a lot of ON Semiconductor FAN5701UMP08X LED Driver ICs applications.
- Down lights
- Panel lighting
- Industrial LED Lighting: Image Recognition Devices
- Replacement lamps
- Stage Lighting and Signage
- Auxiliary lights for on-vehicle cameras
- Street lighting
- Flicker-free LED Lighting using R1580N
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
