FAN5701UMP15X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 177mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Current Rating | 15mA |
| Frequency | 1.2MHz |
| Base Part Number | FAN5701 |
| Number of Outputs | 6 |
| Output Voltage | 4V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 180mA |
| Max Supply Current | 4.4mA |
| Max Output Voltage | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Output Current per Channel | 15mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 180mA |
| Dimming | PWM |
| Number of Segments | 6 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.55mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FAN5701UMP15X Overview
Board space is saved by its 16-UFQFN Exposed Pad package.In this LED driver, there are 6 outputs.It is possible to mount the led driver using Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.-40°C~85°C TA is the operating temperature of the led driver.Backlight has many advantages.This system operates at 1.2MHz frequency.There are 16 terminations associated with it.The base of this board is configured as 16 pins.There are 6 segments in it.It has been mounted on Surface Mount.This LED driver can be found under the base part number FAN5701.There is no problem with the voltage of 5.5V.In addition, it can be classified as Display Drivers according to its characteristics.A minimal input voltage of 2.7V is required for it to operate.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 2.7V.There is 5V maximum value for supply current.Its high efficiency is based on the fact that the maximal supply current should not exceed 4.4mA.The current that can be supplied to the load is 180mA.There is 4V voltage output from it.5V should be the maximum output voltage.
FAN5701UMP15X Features
Available in the 16-UFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Output voltage of 4V
FAN5701UMP15X Applications
There are a lot of ON Semiconductor FAN5701UMP15X LED Driver ICs applications.
- Stage Lighting and Signage
- General lighting
- Street lighting
- Medical surgery lighting
- Constant Voltage Power Source for portable equipment
- High-end retail lighting
- OLED power supply for portable equipment
- Museum lighting
- Down lights
- Replacement lamps
