FAN5701UMP20X
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 177mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Current Rating | 20mA |
| Frequency | 1.2MHz |
| Base Part Number | FAN5701 |
| Number of Outputs | 6 |
| Output Voltage | 4V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 180mA |
| Max Output Voltage | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Output Current per Channel | 20mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 180mA |
| Dimming | PWM |
| Number of Segments | 6 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.55mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
FAN5701UMP20X Overview
There is a 16-UFQFN Exposed Pad package on the board that is used to save space. For the design of these LED drivers, 6 outputs are used.Surface Mount represents this mounting method.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.If the led driver ic is set to -40°C~85°C TA, it will work normally.Taking advantage of Backlight has considerable benefits.It operates on the basis of the frequency of 1.2MHz.In this case, it operates with terminations of 0.It is configured with 16 pins as its base.There are estimated to be 6 segments.It is mounted in the way of Surface Mount.This LED driver can be found under the base part number FAN5701.It is acceptable to operate with a supply voltage of 5.5V.In addition, a Display Drivers is assigned based on the characteristics of the object.As its minimal input voltage, it operates at 2.7V.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 2.7V.In terms of supply current, there is a maximum value of 5V.There is no current that can be supplied to the load.There is 4V voltage output from it.It is not recommended to exceed 5V in the output voltage.
FAN5701UMP20X Features
Available in the 16-UFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Output voltage of 4V
FAN5701UMP20X Applications
There are a lot of ON Semiconductor FAN5701UMP20X LED Driver ICs applications.
- Medical surgery lighting
- Refrigeration lighting
- General lighting
- Sports Facility Lighting
- High-end retail lighting
- LED Lightings for Industrial Equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Stage Lighting and Signage
- LED backlight driver for LCD displays for Tablets and Note PCs
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
