FAN5701UMP30X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 177mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Current Rating | 30mA |
| Frequency | 1.2MHz |
| Base Part Number | FAN5701 |
| Number of Outputs | 6 |
| Output Voltage | 4V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 180mA |
| Max Supply Current | 4.4mA |
| Max Output Voltage | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Output Current per Channel | 30mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 180mA |
| Dimming | PWM |
| Number of Segments | 6 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.55mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FAN5701UMP30X Overview
There is a 16-UFQFN Exposed Pad package on the board that is used to save space. Typically, LED drivers have 6 outputs.As a mounting method, Surface Mount is used.With high efficiency, it appears as a DC DC Regulator.-40°C~85°C TA is the operating temperature of the led driver.Backlight benefits significantly from the program.Based on the frequency of 1.2MHz, it operates on the basis of a pulse.It operates with terminations of 16.It has a base of 16 pins.A total of 6 segments are estimated.On the Surface Mount, a device is mounted.FAN5701 is the base part number for the LED driver.5.5V is an acceptable voltage.Depending on its characteristics, it is classified into Display Drivers.At its minimal input voltage, it operates at 2.7V.For maximum efficiency, it operates at the minimal voltage of 2.7V.When the maximum supply current is allowed, the value reaches 5V.As long as the maximum supply current is less than 4.4mA, this device is capable of providing high efficiency.180mA is the maximum current the load can handle.The voltage at the output terminal is 4V.5V should be the maximum output voltage.
FAN5701UMP30X Features
Available in the 16-UFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Output voltage of 4V
FAN5701UMP30X Applications
There are a lot of ON Semiconductor FAN5701UMP30X LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Other Electronic Devices
- Constant Voltage Power Source for portable equipment
- LED Lightings for Inspection Devices
- General lighting
- LED Lighting PFCs, Linear Dimmable
- Panel lighting
- Flicker-free LED Lighting using R1580N
- LED backlight driver for LCD displays for Tablets and Note PCs
- Dimmable LED for vehicle interiors
