FAN5702UMP08X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 177mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Current Rating | 8mA |
| Frequency | 1.2MHz |
| Base Part Number | FAN5702 |
| Number of Outputs | 6 |
| Output Voltage | 4V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 180mA |
| Max Supply Current | 4.4mA |
| Max Output Voltage | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Output Current per Channel | 30mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 180mA |
| fmax-Min | 0.4 MHz |
| Dimming | I2C, PWM |
| Number of Segments | 6 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.55mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FAN5702UMP08X Overview
16-UFQFN Exposed Pad saves board space. LED drivers use 6 outputs for their design.Surface Mount represents this mounting method.It is highly performing and reliable when it emerges as a DC DC Regulator.It is capable of working normally at -40°C~85°C TA.Backlight has many advantages.Based on the frequency of 1.2MHz, it operates.In this case, the terminations are set to 16.There are 16 pins on the base of this LED driver.There are estimated to be 6 segments.There is a device mounted on the Surface Mount.FAN5702 is the base part number for the LED driver.5.5V is an acceptable voltage.As a result, its characteristics can also be categorized as Display Drivers.At its minimal input voltage, it operates at 2.7V.For highest efficiency, it works with a minimal supply voltage of 2.7V.The maximum value of supply current is 5V.The device can deliver high efficiency when the maximal supply current is less than 4.4mA.A load can be supplied with 180mA current.It has a voltage of 4V.Voltages above 5V should not be allowed.
FAN5702UMP08X Features
Available in the 16-UFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Output voltage of 4V
FAN5702UMP08X Applications
There are a lot of ON Semiconductor FAN5702UMP08X LED Driver ICs applications.
- Panel lighting
- LED Lightings for Inspection Devices
- OLED power supply for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Down lights
- White LED Backlight for portable equipment
- Constant Voltage Power Source for portable equipment
- LED headlights
- Stage Lighting and Signage
- High-end retail lighting
