FAN5702UMP20X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 177mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Current Rating | 20mA |
| Frequency | 1.2MHz |
| Base Part Number | FAN5702 |
| Number of Outputs | 6 |
| Output Voltage | 4V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 180mA |
| Max Output Voltage | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Output Current per Channel | 30mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 180mA |
| fmax-Min | 0.4 MHz |
| Dimming | I2C, PWM |
| Number of Segments | 6 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.55mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FAN5702UMP20X Overview
16-UFQFN Exposed Pad package saves space on the board. LED drivers are designed with 6 outputs.In this case, mounting method is Surface Mount.With high reliability and efficiency, this emerges as a DC DC Regulator.-40°C~85°C TA is the operating temperature of the led driver.The benefits it provides to Backlight are considerable.It operates on the basis of the frequency of 1.2MHz.In this case, it uses 16 terminations.There are 16 pins used to form the base of its configuration.It is estimated that there are 6 segments.There is a device mounted on the Surface Mount.There is a base part number FAN5702 for this LED driver.There is no problem with the voltage of 5.5V.Moreover, it can be classified as Display Drivers due to its characteristics.It operates at a voltage of 2.7V as its minimal input voltage.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 2.7V.In the case of supply current, there is a maximum value of 5V.The current that can be supplied to the load is 180mA.There is 4V voltage at the output terminal.Voltages above 5V should not be allowed.
FAN5702UMP20X Features
Available in the 16-UFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Output voltage of 4V
FAN5702UMP20X Applications
There are a lot of ON Semiconductor FAN5702UMP20X LED Driver ICs applications.
- Stage and Studio lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lighting
- Industrial LED Lighting: Image Recognition Devices
- Architectural lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Amusement Machines
- Replacement lamps
- Stage Lighting and Signage
- Scanners and Handy Terminals
