FAN5702UMP30X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 177mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Current Rating | 30mA |
| Frequency | 1.2MHz |
| Base Part Number | FAN5702 |
| Number of Outputs | 6 |
| Output Voltage | 4V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 180mA |
| Max Output Voltage | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Output Current per Channel | 30mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 180mA |
| fmax-Min | 0.4 MHz |
| Dimming | I2C, PWM |
| Number of Segments | 6 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.55mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FAN5702UMP30X Overview
To save board space, it uses the 16-UFQFN Exposed Pad package. A LED driver with 6 outputs is designed.This mounting method is Surface Mount.As a DC DC Regulator, it has high efficiency and reliability.It is capable of working normally at -40°C~85°C TA.There are considerable benefits for Backlight.1.2MHz is the frequency in which it operates.It operates with 16 terminations.It has a base configuration of 16 pins.A total of 6 segments are estimated.As you can see, it is mounted by Surface Mount.It can be found under the part number FAN5702.The supply voltage of 5.5V is an acceptable maximum value.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.A minimal input voltage of 2.7V is required for it to operate.It is designed to operate at a minimal voltage of 2.7V to achieve the highest efficiency.It reaches 5V when the maximum supply current is allowed.The current that can be supplied to the load is 180mA.The output voltage is 4V.If the output voltage exceeds 5V, it should be corrected.
FAN5702UMP30X Features
Available in the 16-UFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Output voltage of 4V
FAN5702UMP30X Applications
There are a lot of ON Semiconductor FAN5702UMP30X LED Driver ICs applications.
- Amusement Machines
- High-end retail lighting
- Medical surgery lighting
- LED Lighting PFCs, Linear Dimmable
- Museum lighting
- Portable lighting
- Other Electronic Devices
- A- lamps
- LED Lightings for Industrial Equipment
- Down lighting
