FAN7085MX-GF085
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Voltage - Supply | 4.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Frequency | 200kHz |
| Base Part Number | FAN7085 |
| Qualification Status | Not Qualified |
| Max Output Current | 450mA |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Power Dissipation | 625mW |
| Output Current | 450mA |
| Propagation Delay | 1 μs |
| Input Type | Inverting |
| Turn On Delay Time | 1 μs |
| Rise Time | 65ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 500 ns |
| Rise / Fall Time (Typ) | 65ns 25ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 450mA 450mA |
| High Side Voltage - Max (Bootstrap) | 300V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4.01mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
FAN7085MX-GF085 Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is indicated.A total of 1 drivers are integrated into its configuration.In the direction of Surface Mount, gate drivers is mounted.By using 4.5V~20V supply voltage, it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.The input type is Inverting.Its configuration starts with 8 terminations.There are numerous related parts listed under its base part number FAN7085.Surface Mount is the way it takes to mount the device.When designing, the device is configured with 8 pins.A supply voltage of 5V is required for operation.There is a maximum output current of 450mA that can be achieved.Several electronic components are included in its subcategory of MOSFET Drivers.Ideally, the high-side voltage should not exceed 300V.An output current of 450mA is supported.Using 625mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 5V.The gate driver is part of the Automotive, AEC-Q100 series.By using the frequency 200kHz, we can increase efficiency.
FAN7085MX-GF085 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 300V
Maximum power dissipation of 625mW
Operating with the supply voltage of Automotive, AEC-Q100
FAN7085MX-GF085 Applications
There are a lot of ON Semiconductor FAN7085MX-GF085 gate drivers applications.
- Automotive Applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- DC-DC Converters
- Digitally controlled power supplies
- Power factor correction (PFC) circuits
- Isolated Gate Driver Supplies
- Motor Controls
- DC/DC converters
- Industrial Modules
- High-voltage isolated DC-DC converters
