FAN7380MX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | FAN7380 |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 180mA |
| Power Supplies | 15V |
| Voltage | 10V |
| Nominal Supply Current | 610μA |
| Power Dissipation | 625mW |
| Output Current | 180mA |
| Max Supply Current | 610μA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 ns |
| Rise Time | 230ns |
| Fall Time (Typ) | 90 ns |
| Turn-Off Delay Time | 190 ns |
| Rise / Fall Time (Typ) | 230ns 90ns |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 90mA 180mA |
| Max Junction Temperature (Tj) | 150°C |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.19 µs |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Ambient Temperature Range High | 125°C |
| Height | 1.85mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN7380MX Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.There is a package in the form of Tape & Reel (TR).In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is 10V~20V it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET has been used in its design.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is the input type used in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Many related parts can be found under its base part number FAN7380.Mosfet driver is mounted using Surface Mount.At the time of design, it is configured with 8 pins.The device is specifically designed to operate at 15V volts.180mA is the maximum output current.Its subcategory of MOSFET Drivers contains various useful electronic components.High-side voltage - Max (Bootstrap) can be as low as 600V.Based on its basis, it integrates 2 outputs.The device is capable of delivering a current of 180mA.This device has a maximum power dissipation of 625mW, indicating that it is capable of reducing power loss without overheating.For higher stability, the supply current should be kept at 610μA.The power supply of 15V is able to solve the power supply problems for a wide variety of applications.Mosfet gate drivers outputs 620V as voltage.
FAN7380MX Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
FAN7380MX Applications
There are a lot of ON Semiconductor FAN7380MX gate drivers applications.
- Power factor correction (PFC) circuits
- Industrial Modules
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Head-up and Head mounted displays
- Commercial air-conditioning (CAC)
- Motor Control
- High power buffers
- LCD/LCoS/DLP portable and embedded pico projectors
- Broadcast equipment
- Isolated switch mode power supplies (SMPS)
