FAN7384M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 218.3mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Max Power Dissipation | 1W |
| Voltage - Supply | 13V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FAN7384 |
| Qualification Status | Not Qualified |
| Output Voltage | 620V |
| Max Output Current | 500mA |
| Supply Voltage-Min (Vsup) | 13V |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Nominal Supply Current | 1.3mA |
| Power Dissipation | 1W |
| Output Current | 250mA |
| Propagation Delay | 260 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 260 ns |
| Rise Time | 100ns |
| Fall Time (Typ) | 80 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 1.2V 2.5V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height Seated (Max) | 1.8mm |
| Length | 8.56mm |
| Width | 3.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
FAN7384M Overview
Gate drivers provides greater flexibilGate driversy to use the 14-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tube.Configuration is based on 2 drivers.Surface Mount is the way in which it is mounted.In the absence of a 13V~20V supply voltage, its superiority can be demonstrated.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Input type of Non-Inverting is used.14 terminations constitute its foundation.Many related parts can be found under its base part number FAN7384.Devices are mounted by Surface Mount.When the device is designed, it has 14 pins.A voltage of 15V is required for its operation.There is a maximum output current of 500mA that can be achieved.A boot strap voltage of 600V is the maximum possible high-side voltage.An output current of 250mA is supported.1W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.The voltage it outputs is 620V.As an analog IC, it utilizes AC MOTOR CONTROLLER.
FAN7384M Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
FAN7384M Applications
There are a lot of ON Semiconductor FAN7384M gate drivers applications.
- Industrial Power Supplies
- Commercial and agricultural vehicles (CAV)
- Welding
- Topologies
- Line drivers
- Telecom switch mode power supplies
- DC/DC converters
- Isolated Gate Driver Supplies
- Commercial air-conditioning (CAC)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
