FAN7389MX1
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Voltage - Supply | 10V~20V |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | FAN7389 |
| Number of Outputs | 3 |
| Max Output Current | 650mA |
| Nominal Supply Current | 400μA |
| Power Dissipation | 1.4W |
| Output Current | 650mA |
| Propagation Delay | 650 ns |
| Input Type | Non-Inverting |
| Rise Time | 50ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 350mA 650mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| High Side Voltage - Max (Bootstrap) | 600V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 1.206g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
FAN7389MX1 Overview
A higher degree of flexibility is achieved by adopting its 28-SOIC (0.295, 7.50mm Width) package.A packaging method of Tape & Reel (TR) is indicated.There are 6 drivers installed for this device.Surface Mount is mounted in the way of the device.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~150°C TJ.This program uses the input type of Non-Inverting.There are various parts that can be found under its base part number FAN7389.Mosfet driver is mounted using Surface Mount.A total of 28 pins are available on the device.In the maximum case, the output current can be limited to 650mA.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.For its basis, there are 3 outputs integrated.An output current of 650mA is supported.According to its maximum power dissipation, 1.4W is capable of conducting and transferring a large amount of power without overheating.
FAN7389MX1 Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.4W
FAN7389MX1 Applications
There are a lot of ON Semiconductor FAN7389MX1 gate drivers applications.
- Telecom switch mode power supplies
- Automotive Applications
- Solar inverters
- Dual-Battery Systems
- Motor Controls
- Topologies
- High frequency line drivers
- LCD/LCoS/DLP portable and embedded pico projectors
- Welding
- 3-Phase Motor Inverter Driver
