FAN7527BN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 496mg |
| Operating Temperature | -25°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 800mW |
| Voltage - Supply | 11.5V~30V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Base Part Number | FAN7527 |
| Output Voltage | 3.8V |
| Input Voltage-Nom | 14V |
| Power Supplies | 14V |
| Analog IC - Other Type | POWER FACTOR AND FLUORESCENT LIGHT CONTROLLER |
| Operating Supply Current | 3mA |
| Power Dissipation | 1.1W |
| Output Current | 500mA |
| Max Supply Current | 8mA |
| Input Voltage (Min) | 9.5V |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Input Current | 3mA |
| Mode | Discontinuous (Transition) |
| Current - Startup | 60μA |
| Height | 5.08mm |
| Length | 9.83mm |
| Width | 6.67mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN7527BN Overview
Packaged in a 8-DIP (0.300, 7.62mm) format.A Tube-package is used.Through Hole is the mounting type of the device.In order to operate it, it should be connected to the voltage supply of 11.5V~30V.A setting of -25°C~125°C has been set on the device.POWER FACTOR AND FLUORESCENT LIGHT CONTROLLER is another IC type on the part.A number of 8 terminals can be found on the device.There is a current of 60μA at startup.Pin number 8 remains the same for the component.Best part of the device has a FAN7527 in it.If the input voltage of the device is as low as 9.5V, it can function properly.Switching Regulator or Controllers is a subclass of it in some ways.There is a maximum voltage (Max) for its input.It is a part of mount Through Hole.As a rule of thumb, the component is always powered by a 14V volt supply.A supply temperature of 8mA is the maximum it can handle.Device supplies are 14V.Default supply current is 3mA for the gadget.Operation can be performed by using the 3.8V output.
FAN7527BN Features
FAN7527BN Applications
There are a lot of ON Semiconductor FAN7527BN PFC PMICs applications.
- Home electric appliance
- HMI (Human-Machine Interface)
- Timing and clock ICs
- Noise filters
- Signal chain
- Post DC-DC regulation
- Motor controllers
- Set top boxes
- Pressure sensor
- Wireless charge devices
