FAN7621N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627826g |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 200W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1.56W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Base Part Number | FAN7621 |
| Max Output Current | 8.3A |
| Operating Supply Voltage | 17V |
| Input Voltage-Nom | 390V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 200μA |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | 11.3V~25V |
| Max Supply Current | 8mA |
| Control Features | Frequency Control |
| Max Output Voltage | 24V |
| Topology | Half-Bridge |
| Min Input Voltage | 340V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 300kHz |
| Max Input Voltage | 400V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Rise Time | 65ns |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 17V |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 52 % |
| Number of Drivers | 1 |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 14.5V |
| Height | 3.42mm |
| Length | 19.68mm |
| Width | 6.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FAN7621N Overview
It is embedded in package 16-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.It is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~130°C TJ .In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .When the switching frequency reaches Up to 300kHz , the circuit is closed.This AC/DC converter is designed for use within the range of 11.3V~25V supply voltage (Vcc/Vdd).As a result, it has had 16 terminations.The ac/dc converter has 16 pins.Through Hole is the recommended mounting method for the ac dc converters.The FAN7621 family can be used to search for similar acdc converters.The ac to dc conversions are included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 600mA .This power AC DC is capable of reaching high efficiency when operating at a frequency of 100kHz .You may read the REACH SVHC standard at No SVHC .Input voltage for the AC to DC converter is available under 400V .An input voltage of less than 340V volts is acceptable for use with this AC to DC inverter.Interfacing ICs conduct when there is 17V supply voltage.Supply currents up to 8mA can be handled by this power AC DC.
FAN7621N Features
Packaged with 16-DIP (0.300, 7.62mm)
Switching Frequency at Up to 300kHz
With 16 pins
Output Current at 600mA
Operating Supply Voltage at the range of 17V
FAN7621N Applications
There are a lot of ON Semiconductor FAN7621N AC DC Converters applications.
- Switching AC-DC Adapter
- Open Frame Switching Power Supply
- Lighting controls
- Handheld/Battery-Powered Systems
- Adapter/Charger for Cordless Phones
- Power adapters for monitors
- Set-top boxes
- Remotely-controlled appliances
- Vacuum Cleaner
- Universal Off-Line Power Supplies
