Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
230.4mg |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
625mW |
Voltage - Supply |
10V~20V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
FAN7842 |
Qualification Status |
Not Qualified |
Max Output Current |
650mA |
Power Supplies |
15V |
Nominal Supply Current |
600μA |
Power Dissipation |
625mW |
Output Current |
650mA |
Propagation Delay |
300 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
300 ns |
Rise Time |
60ns |
Fall Time (Typ) |
30 ns |
Turn-Off Delay Time |
300 ns |
Rise / Fall Time (Typ) |
60ns 30ns |
Channel Type |
Independent |
Number of Drivers |
2 |
Turn On Time |
0.3 µs |
Output Peak Current Limit-Nom |
0.65A |
Driven Configuration |
Half-Bridge |
Gate Type |
IGBT, N-Channel MOSFET |
Current - Peak Output (Source, Sink) |
350mA 650mA |
High Side Driver |
YES |
Logic Voltage - VIL, VIH |
0.8V 2.9V |
Turn Off Time |
0.3 µs |
High Side Voltage - Max (Bootstrap) |
200V |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
RoHS Status |
RoHS Compliant |
FAN7842M Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.The packaging method is indicated by Tube.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.By using 10V~20V supply voltage, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as the input type.Its configuration is based on a total of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number FAN7842.The device is mounted using Surface Mount.When designing, the device is configured with 8 pins.In order to operate, a voltage of 15V has to be applied.Mosfet driver is possible for the output current to be as low as 650mA.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Maximum (Bootstrap) voltage can be up to 200V.The output current of this device can be set to 650mA.Considering its maximum power dissipation, 625mW shows its maximum capacity to transfer and conduct power loss without overheating.With its 15V power supply, it provides power for diverse applications.
FAN7842M Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 200V
Maximum power dissipation of 625mW
FAN7842M Applications
There are a lot of ON Semiconductor FAN7842M gate drivers applications.
- UPS systems
- Solar inverters
- Motor controllers
- Broadcast equipment
- AC-DC Inverters
- PCMCIA applications
- Solar power supplies
- DC-DC Converters
- Power factor correction (PFC) circuits
- Portable computers