FCT162373CTPACTE4
| Parameters | |
|---|---|
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74FCT162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 4.2 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 2 |
| Number of Output Lines | 16 |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
FCT162373CTPACTE4 Overview
A package called 48-TFSOP (0.240, 6.10mm Width) contains it. The package is in the form of Tape & Reel (TR). Tri-State is used for the output it is configured with. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74FCT series. 8 Bits are used in the design of this electronic part. In this device, there are 48 terminations that have been designed. There is no doubt that it belongs to the family 74FCT162373. The device works with a voltage of 5V for its supply voltage. The 48 pind are equipped with it. In the world of electronics, this electronic device belongs to the family of FCT. 48 pins are used in its design. Surface Mount is the way in which this electronic part is mounted. This device has a total of 2 ports. It belongs to the subcategory of FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. It operates from 5V power supplies. The supply voltage (Vsup) should be greater than 4.5V. The reliability of this device makes it well suited to TAPE AND REEL. It features maximum flexibility in design due to 24mA output current. 16 output lines generate the binary equivalent of the input lines. The quiescent current consumed by it is 5μA because it is unaffected by external factors.
FCT162373CTPACTE4 Features
48-TFSOP (0.240, 6.10mm Width) package
74FCT series
8 Bits
74FCT162373 family
48 pin count
48 pins
5V power supplies
FCT162373CTPACTE4 Applications
There are a lot of Texas Instruments FCT162373CTPACTE4 Latches applications.
- Shift Registers
- Parallel-to-Serial Data Conversion
- Double bus register system
- Up-Down Johnson
- Automotive Cluster
- Automotive HEV/EV Powertrain
- Communication systems
- Registers
- Meter applications
- Hammer
