FCT162373CTPACTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74FCT162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 2 |
| Number of Output Lines | 16 |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
FCT162373CTPACTG4 Overview
48-TFSOP (0.240, 6.10mm Width) contains it. A Tape & Reel (TR) package is used to package it. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. In the 74FCT series, this FPGA is located. With this electronic part, there are 8 bits. The device consists of 48 terminations that are designed to be used in conjunction with it. 74FCT162373 is its family. It operates with a supply voltage of 5V. It is equipped with 48 pin count. It is a member of the FCT family of electronic devices. 48 pins are used in its design. It is mounted according to the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. When Vsup reaches 5.5V, the maximal supply voltage is reached. 5V power supplies are needed to operate it. It is recommended that the supply voltage (Vsup) be greater than 4.5V. Based on its reliable performance, this device is suitable for TAPE AND REEL. With 24mA, maximum design flexibility is ensured. It follows that 16 output lines are generated from the binary equivalent of the input line.
FCT162373CTPACTG4 Features
48-TFSOP (0.240, 6.10mm Width) package
74FCT series
8 Bits
74FCT162373 family
48 pin count
48 pins
5V power supplies
FCT162373CTPACTG4 Applications
There are a lot of Texas Instruments FCT162373CTPACTG4 Latches applications.
- Parallel data storage
- High-speed logic
- Lamp and Display (LED)
- Buffer Storage
- Serial Output Data Queuing
- A/D and D/A conversion
- Counter
- Stacked or Push-Down Registers
- Parallel Input
- Parallel data storage
