FCT162501ATPACTG4
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162501 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 5.6 ns |
| Family | FCT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Transceiver |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 5.1 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
FCT162501ATPACTG4 Overview
The package 56-TFSOP (0.240, 6.10mm Width) contains this file embedded in it. It is packaged in a way that resembles Tape & Reel (TR). A 18-Bit circuit achieves its superior flexibility by using 18-Bit components. This electrical device has a logic type of Universal Bus Transceiver, which means that it is a logic device. There is an electronic part that is mounted in a Surface Mount-shaped arrangement. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. Featuring high and low output currents, 24mA 24mA offers maximum design versatility. Using 4.5V~5.5V as a supply voltage, it operates. As it belongs to the 74FCT162501 family, it should be taken into consideration. Transmission lines can be terminated with 56 terminations by using a device that matches the characteristic impedance. In order to function normally, the supply voltage should be higher than 5V. 56 pins are included. It is designed with 18 Bits. There are a number of termination types, including 2 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. It is mounted in the way of Surface Mount so that this electronic part can be seen. A 56-pin is used in this design. The device belongs to the FCT family of electronic devices. When Vsup reaches 5.5V, the maximum supply voltage has been reached. There should be a greater supply voltage (Vsup) than 4.5V. A 5V power supply is used to operate it. It uses POSITIVE EDGE for its trigger. Based on its reliable performance, this device is most suitable for TAPE AND REEL because of its robust design.
FCT162501ATPACTG4 Features
56-TFSOP (0.240, 6.10mm Width) package
74FCT162501 family
56 pin count
56 pins
5V power supplies
FCT162501ATPACTG4 Applications
There are a lot of Texas Instruments FCT162501ATPACTG4 Universal Bus Functions applications.
- CMOS circuitry
- Instrumentation Systems
- Solar energy generation
- Electronic Points of Sale
- Induction cooker
- Solar street light
- Memory devices
- Automatic watering system
- Electronic and electrical project circuits
- Sewing machine
