FCT162823ATPACTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 9 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 300pF |
| Prop. Delay@Nom-Sup | 10 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FCT162823ATPACTG4 Overview
56-TFSOP (0.240, 6.10mm Width)is the packaging method. It is included in the package Tape & Reel (TR). It is configured with Tri-State, Non-Invertedas an output. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The 74FCTseries comprises this type of FPGA. D latch consists of 2 elements. This process consumes 500μA quiescents. There are 56 terminations,It is a member of the 74FCT162823 family. A voltage of 5V is used to power it. The input capacitance of this JK flip flopis 4.5pF farads. Devices in the FCTfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 56. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. An electronic part with 9bits has been designed. As soon as 5.5Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 4.5V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The D latch operates on 5V volts. This flip flop has a total of 2ports. With a current output of 24mA , it offers maximum design flexibility. In order for the chip to function, it has 9output lines.
FCT162823ATPACTG4 Features
Tape & Reel (TR) package
74FCT series
56 pins
9 Bits
5V power supplies
FCT162823ATPACTG4 Applications
There are a lot of Texas Instruments FCT162823ATPACTG4 Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Synchronous counter
- Data transfer
- QML qualified product
- Dynamic threshold performance
- Power down protection
- Supports Live Insertion
- Buffered Clock
- High Performance Logic for test systems
- Matched Rise and Fall
